Is Your Pool Pump Blowing Bubbles? Learn the Cause & Fix It!
In OKC's heat, a prime pool pump is essential. But even with an airtight design, leaks can develop over time. Notice air bubbles in your pump basket? This could signal a leak impacting prime and circulation. Don't let a minor issue become a major headache – address it promptly with professional swimming pool repair in OKC.
Expert Tips for Swimming Pool Repair - Removing Air from Your Pool Pump
When it comes to expert swimming pool repair, proper care of your pool pump is crucial. One common issue pool owners face is air getting trapped in the pump, which can hinder its performance. Here's a step-by-step guide, recommended by professionals, on how to remove air from your pool pump:
Power Off: Before starting any maintenance, ensure the power to the pool pump is turned off. Safety first!
Release Air Pressure: Locate the air release valve at the top of your pool filter and open it to release any trapped air pressure. This will help in removing the air from the system.
Check the Filter: Remove the pool filter cover and inspect the pump strainer box. Ensure it is filled with water. If not, use a hose to fill it up.
Inspect for Damage: While you have the filter open, take a moment to inspect the pool filter gasket for any cracks or damage. If you notice any issues, it's best to replace the gasket.
Lubricate and Reassemble: Apply a small amount of lubricant to the pool filter gasket to ensure a proper seal. Reassemble the pool filter cover securely.
Power On with Valve Open: Turn the power back on to the pool pump while leaving the air release valve open. This will allow any remaining air to escape.
Close the Valve: Once you see water flowing steadily from the valve, you can close it. This indicates that the air has been successfully removed from the pool filter.
Contact a Professional if Needed: If you continue to experience issues with air in your pool pump, it's best to contact your local pool service professional for further assistance.
By following these steps, you can effectively remove air from your pool pump and ensure it functions optimally, keeping your swimming pool clean and enjoyable all season long.
Pro Tip - Treating Pool Pump Air Leaks with Shaving Cream
Ever heard of using shaving cream for swimming pool repair? Professionals swear by this surprising technique to pinpoint elusive air leaks that can plague your pump. Here's the scoop:
Air leaks often lurk in unsuspecting spots like the male adapter, valve stems, pump lid, O-ring, or even drain plugs. But the common denominator? They all occur before the pump impeller.
To play detective, grab a can of foaming shaving cream. Generously apply it to suspected leak areas on both the pump and its plumbing. Keep a close eye on the shaving cream – a dimpling or swirling effect indicates air being sucked into the system, revealing the leak's exact location.
Once the culprit is identified, rinse off the shaving cream with a hose. Now, armed with this knowledge, you can take the necessary steps to repair or replace the faulty component, restoring your pump to peak performance.
Frustrated with Your Pool Pump? Rose Hill Pools Has Your Back!
Still struggling with air in your pool pump despite DIY efforts? Don't let it dampen your summer fun. Trust the experts at Rose Hill Pools for reliable swimming pool repair in OKC. Our seasoned professionals have the expertise and tools to diagnose and fix any swimming pool issues quickly, ensuring your pool is back to its refreshing best in no time. Contact us today and let us handle the hassle while you enjoy your pool worry-free.